PG-104-125

PG-104-125

by sales.aus@protoconvert.com

OPC DA – SNMP Gateway (PG-104-125) Solutions is a powerful, excellent, fully flexible, and productive Building & Industrial Automation gateway that allows integrators to easily connect devices to networks in commercial buildings and industrial facilities.

SNMP and OPC DA (client only) protocols are supported by the PG-104-125 gateway.

 

This gateway may be set up to do the following:

OPC DA Client and SNMP Client : This gateway will connect to a third-party OPC DA server and read or write tags. It will, however, be a SNMP client that can receive and write data from a SNMP server.

When you have SNMP -based server devices and require a way to read and write values to your OPC server, this mode comes in handy. Alternatively, you may wish to read OPC DA tags on a regular basis and write the values to a SNMP server device.

 

OPC DA Client and SNMP Server: The most frequent form of operation is using an OPC DA client and a SNMP server. In this mode, the gateway is set to read OPC DA tags and broadcast them as a server on SNMP .

This is most likely the most popular operating mode. In this mode, the gateway is set to read OPC DA tags and broadcast them as a server on SNMP .

As a result, a third-party building automation/management system (BAS/BMS) may now read all of this SNMP data (and hence have access to the OPC DA data via the gateway). OPC DA tags may also be written from the SNMP side. As a result, the BAS/BMS system can use the gateway to set values on the OPC DA server.

With its robust set of features, the Gateway has benefited system integrators all around the world. The gateway also runs the same protocol conversion software on a productive and cost-effective platform, backed by the same experience, engineering skill, and technically proven support that integrators have come to expect from this Gateway.

 

 

SNMP-OPC-DA

Features:

  • In the standard version, you may interface up to 1000 points (upgrades to higher points can be purchased).
  • DIN rail attachment.
  • In-built one wire Serial Port

 

Application Scenarios:

  • This gateway is frequently used to connect OPC DA-enabled lift/elevator/escalator systems to a BMS/BAS system running on SNMP .
  • An OPC DA interface is available on some fire alarm systems. You may also use this gateway to monitor your fire system from your SNMP -based BMS/BAS.