BACnet

BACnet

by sales.aus@protoconvert.com

BACnet is becoming the most commonly used protocol for building automation networks

The most popular flavors of BACnet in use today are BACnet MSTP and BACnet IP.

IntegrationTek offers excellent solutions to integrate your BACnet MSTP and BACnet IP devices on other communication protocols like Modbus RTU , Modbus TCP/IP, LonWorks, SNMP, JCI Metasys N2 and many others.

All our protocol gateways can be configured to transfer data in both directions. In other words, using our gateways any of the following are possible:

Configure our gateway as BACnet MSTP or BACnet IP master and a server on the other protocol interface (like Modbus). In this mode your Modbus based SCADA/Control system can read/write data from the BACnet devices via our gateway.

Configure our gateway as a BACnet MSTP or BACnet IP slave and as master/client on the other protocol interface (like Modbus). In this mode your BACnet based controller/BAS/BMS/SCADA will be able to monitor and control devices on the other protocol.

Configure our gateway as a BACnet MSTP or BACnet IP slave and as a slave on the other protocol interface. This mode is for exchanging data between  a BACnet and a non-BACnet control system.

Configure our gateway as a BACnet MSTP or BACnet IP master and a master on the other protocol interface. This mode is useful for controlling a slave device on one protocol based on a sensor/data value on another protocol.

Following are the most popular gateway combinations available. Please select the part number/combination of your choice for more details.

Interface 1/Int2 BACnet MSTP BACnet IP Modbus RTU Modbus TCP/IP SNMP LonWorks JCI Metasys N2
BACnet MSTP PG-103-102-AAPG-103-102-AAPG-102-100-AAPG-102-101-AAPG-102-104-AAPG-102-105-ACPG-102-106-AA
BACnet IPPG-103-102-AAPG-103-102-AAPG-103-100-AAPG-101-103-XXPG-103-104-XXPG-103-105-ACPG-103-106-AA

BACnet gateway : PG-103-102-AA

PG-103-102-AA is an excellent solution to enable data exchange between BACnet MSTP and BACnet IP networks. This device can be configured to be a BACnet router or a BACnet gateway.

In the BACnet router mode: It offers transparent routing between BACnet networks requiring minimal configuration.

In the BACnet gateway mode: It is fully configurable and each BACnet object on one network can be mapped to a corresponding(same or different type) object on the other BACnet network.

 

Please visit our other converter range:

Modbus Gateway

SNMP Gateway

Metasys N2 Gateway

Lonworks Gateway