Modbus

Modbus

by sales.aus@protoconvert.com

Modbus Gateway

Modbus protocol is very commonly used as a communication interface for devices.

The most popular flavors of Modbus in use today are Modbus RTU and Modbus TCP.

IntegrationTek offers excellent solutions to integrate your Modbus RTU and Modbus TCP devices on other communication protocols like BACnet MSTP, BACnet IP, LonWorks, SNMP, JCI Metasys N2 and many others.

All our protocol gateways can be configured to transfer data in both directions. In other words, using our gateways any of the following are possible:

Configure our gateway as Modbus RTU or Modbus TCP master and a server on the other protocol interface (like BACnet). In this mode your BACnet based controller/BAS/BMS/SCADA can read/write data from the Modbus devices via our gateway.

Configure our gateway as a Modbus RTU or Modbus TCP slave and as master/client on the other protocol interface (like BACnet). In this mode your Modbus based SCADA/Control system will be able to monitor and control devices on the other protocol.

Configure our gateway as a Modbus RTU or Modbus TCP slave and as a slave on the other protocol interface. This mode is for exchanging data between  a Modbus and a non-modbus control system.

Configure our gateway as a Modbus RTU or Modbus TCP master and a master on the other protocol interface. This mode is useful for controlling a slave device on one protocol based on a sensor/data value on another protocol.

Following are the most popular gateway combinations available. Please select the part number/combination of your choice for more details.

Interface 1/Int2 Modbus RTU Modbus TCP BACnet MSTP BACnet IP SNMP LonWorks JCI Metasys N2
Modbus RTU PG-100-101-AAPG-100-101-AAPG-102-100-AAPG-103-100-AAPG-100-104-AAPG-100-105-ACPG-100-106-AA
Modbus TCPPG-100-101-AAPG-100-101-AAPG-102-101-AAPG-101-103-XXPG-101-104-XXPG-101-105-ACPG-101-106-AA

Key Features

  • Ability to interface up to 1000 points of common BAS protocols
  • 2xRS 485 Ports, 1xEthernet Port
  • BTL Mark – PG-10XX Series
  • LonMark Certified – PG-10XX Series
  • BACnet COV support for fast data communication while reducing traffic over a BACnet network
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • Flat panel mount standard, DIN rail mount option
  • DIP switches to select baud rate or node ID on the fly

 

Please visit our other converter range:

BACnet Gateway

Metasys N2 Gateway

SNMP Gateway

Lonworks Gateway